Operation; Base In Operation; Rover In Operation - u-blox C94-M8P Series User Manual

C94-M8P - User Guide

4 Operation

4.1 Base in operation

When the Base device is in normal operation, by enabling message UBX-NAV-STATUS, the Data View in u-center
shows "TIME" fix mode.
Figure 8: Data View shows "TIME" when Base is in FIXED mode

4.2 Rover in operation

When the Rover device is in normal operation, the Data View in u-center shows "FLOAT" or "FIXED" to indicate
the current operation mode.
Figure 9: Data View shows "FLOAT" or "FIXED" on Rover
Additionally, the message "UBX-NAV-RELPOSNED" in u-center shows more details about relative positions and
accuracies. For more information, refer to the u-center User Guide [4], the u-blox 8 / u-blox M8 Receiver
Description including Protocol Specification [1], and Protocol Specification Addendum for HPG1.30 [5].
UBX-15031066 - R06 Advance Information Operation
Page 14 of 29