Changing Needle Position; Sewing Corners - Brother PE-300S Operation Manual

Changing needle position

Sewing corners

3
1
6
3
When sewing a straight stitch along the left edge of the fabric, you
can press the stitch width arrows to move the needle position from
left to right. This allows you to adjust the distance of the stitches
from the edge of the fabric, while still allowing you to run the edge
of the foot along the edge of the fabric.
Keep the needle at the corner of the fabric, then raise the presser
foot and turn the fabric.
When stitching a hem less than .5 cm in width, baste corners,
change directions and pull the thread behind the foot while sew-
ing.
1 Less than 0.5 cm
37