Brother PE-300S Operation Manual page 107

104
This message will appear
when attempting to re-
store a memory card pat-
tern that has been saved
to a different memory
card than the one inserted
in the machine.
This message will appear
if you attempt to combine
over 36 characters in a
single pattern.
This message will appear
if you press " " key in
the utility stitch mode.
This message will appear
if you attempt to use the
foot controller or press
"REVERSE STITCH"
button during embroidery
mode.
This message is dis-
played when the "NEE-
DLE POSITION" or "RE-
VERSE STITCH" button
is pressed while the bob-
bin winding shaft is
pushed to the right.
This message will appear
if you attempt to select a
pattern while you are still
in mode.
This message is dis-
played when the " "
key is touched during em-
broidering or if the ma-
chine is stopped between
color changes.
This message will appear
if you press " " key
while the machine is
stitching.
This message is dis-
played when a key on the
screen is touched while
the needle is down.
This message is dis-
played when the embroi-
dery unit is attached while
the needle is lowered.