Using The Machine's Control Panel To Allocate An Ip Address; Changing The Ip Address Using The Bradmin Professional Utility - Brother NC-100h Network User's Manual

Using the machine's control panel to allocate
an IP address
Refer to chapter 3 for details on how to configure IP address
information using the machine's control panel. By using the control
panel on the machine, you can program the IP address details at the
same time that other machine parameters are configured.
Changing the IP Address using the BRAdmin
Professional utility
Please download the latest Brother BRAdmin Professional
utility version from http://solutions.brother.com. This utility is
only available for Windows
Start the BRAdmin Professional utility (from Windows
®
Windows 2000/XP), by clicking Start / Programs / Brother
Administrator Utilities / Brother BRAdmin Professional Utilities
/ BRAdmin Professional.
The BRAdmin Professional utility can use the TCP/IP protocols to
communicate with the Brother Print/Fax server.
If you wish to use the TCP/IP protocol to manage the Print/Fax server
make sure that the Print/Fax server has a valid IP address. If you are
not using DHCP, BOOTP or RARP, you will want to change the IP
address.This is how to change the IP address using the BRAdmin
Professional utility:
Use the TCP/IP protocol and let BRAdmin Professional utility find
the Brother Print/Fax server as an unconfigured device.
2 - 2 TCP/IP CONFIGURATION
®
users.
®
98/Me and