Westinghouse WSFS1601SV Instruction Manual page 10

3. Loosen the screw on the back of the fan blades (12) and align
it with the flat indentation on the motor shaft (14) (Fig. 9).
Insert the fan blades into the motor shaft until the screw is
right on top of the flat indentation (Fig. 10). Tighten the screw
clockwise with the screwdriver.
4. Carefully rotate the fan blades (12) a few turns with your
hand to make sure that they are levelled and spin smoothly.
Reassemble if necessary.
5. Open the locking clips (2) around the rim of the front guard (11)
and hook the top onto the rear guard (13).
6. Align the screw holes on the bottom of both guards, and use
the screwdriver to tighten the screw clockwise.
7. Close the locking clips (2) to lock the guards.
WARNING!
• The metal fan blades have sharp edges. Handle with care.
• Before using the appliance, always ensure that all parts of the
appliance are properly assembled to avoid a hazard.
EN
10
HOW TO USE