Hitachi S21 Instruction Manual page 20

The packaging before sterilization is as follows.
1) Put the probe into TYVEK
pouch.
2) Seal the TYVEK Pouch using
a heat sealer. Ensure
that the seal is complete.
3) Put the sealed pouch into
a tray or plastic mesh wire
for sterilization.
TYVEK Pouch
Fig. 4 Packaging in the pouch
TYVEK Pouch
Fig. 5
Tray for
sterilization
Probe in
the Pouch
Fig. 6 Packaging in a tray
- 14 -
Probe
Sealed
Probe
Sealing
Q1E-EP1377