Regulator Installation And Setup; Leak Test - Camp Chef MS40A Manual

Regulator Installation and setup:

1. Turn all valves to the off position
ON
OFF
2. Attach new hose and regulator to the stove as shown. Align the hose to the fuel tube on the stove and push on. Screw on the
outer threaded sleeve in a clockwise direction until tight.
3. Attach hose to cylinder valve by turning clockwise.
4. Open cylinder valve.
5. Perform leak check on hose to stove, and hose to cylinder connections with soapy water. Bubbles indicate a leak. Check that
the connection is tight. Perform another leak check. If there is still a leak, remove the cylinder and contact the manufacturer
for service and repair. 1-800-650-2433.

LEAK TEST

LEAK TEST