Brother MW-145BT User Manual page 52

Even though the misfed
paper was removed, the
error cannot be can-
celled.
An LED is lit or flashing. Refer to the explanation in "Status LED"
The paper does not
feed.
The print is faint (light).
Some torn paper may still remain in the
printer. Contact the sales representative
where the printer was purchased.
on pages 4 to 5.
•
Make sure that the lid of the paper cas-
sette is firmly folded along the fold (1).
(→ Refer to page 15.)
•
Make sure that the paper cassette cover
is securely closed.
(→ Refer to page 18.)
•
The paper may be dirty. Pull out the first
sheet from the back of the paper cas-
sette, and then install the paper cas-
sette again.
(→ Refer to pages 15 to 18.)
•
Clean the pick-up roller.
(→ Refer to page 37.)
Make sure that the paper cassette cover
is securely closed.
(→ Refer to page 18.)
39
Appendix