Replacing the battery
Only use the rechargeable battery (BT-100) that is
designed for this printer. Otherwise there will be a risk
for fire or serious damage.
When handling the rechargeable battery, refer to and
observe the precautions on pages v to ix.
• DO NOT take off the black plastic that covers the
• The battery connector should not be frequently
1
Press the area indicated
1 on the battery cover 2
and slide it off the
MW-145BT.
2
Remove old battery and
disconnect the battery
cord connection.
battery.
unplugged and reconnected, otherwise it may
become damaged or the battery cord may break.
The battery should only be removed when replacing
it at the end of its service life, or when the printer will
not be used for a long period of time.
Danger
11
Getting Started