Brother MW-145BT User Manual page 50

Cleaning the pick-up roller
If the paper is not fed correctly, clean the pick-up roller.
1
Open the paper cassette cover.
2
Rotate the pick-up roller
in the feed direction until
it stops.
3
Attach a piece of cello-
phane tape to the rubber
pick-up roller.
4
Remove the cellophane tape, and turn the pick-
up roller 3 to 4 mm/0.1" to 0.2" in the opposite
direction of the feed direction.
→ Any dirt on the pick-up roller is removed with the tape.
5
Repeat steps 3 and 4 until the pick-up roller is
clean.
Pick-up roller
Cello-
phane tape
37
Appendix
Pick-up roller