Brother MW-145BT User Manual page 25

3
Insert the connector 1
of the battery 2 in the
direction shown right.
Fully insert the connectors. However, do not
apply extreme force.
Be sure to insert the connectors in the correct
orientation, otherwise they may be damaged.
4
Fit the battery cord into
the groove as shown in
the illustration.
5
Install the battery cover
by sliding it onto the back
of the MW-145BT.
• Be careful that you do not catch the battery con-
nector cord.
• Be sure to dispose of the expired battery as directed by
local regulations for the disposal of lithium ion battery.
• When handling the rechargeable battery, refer to
and observe the precautions on pages v to ix.
12
Getting Started
Black
Red