Charging - Brother MW-145BT User Manual

Charging

Use the AC adapter designed specifically for this printer to
charge the battery.
After purchasing this printer, be sure to charge the battery fully
before using it.
1
Plug the AC adapter
cable into the printer.
2
Plug the AC adapter plug
into a household electrical
outlet (AC 110 V
Charging of the lithium ion
battery automatically begins.
→
The orange charging
LED is lit.
→
When charging is finished, the charging
LED goes off.
3
After charging is finished, disconnect the AC adapter.
The MW-145BT cannot be operated solely with the AC
adapter. The rechargeable battery must be installed.
120 V).
-
It takes approximately three hours for the battery
to be recharged from completely empty to fully
charged (with the printer turned off).
Recharge the battery in an environment with a
temperature between 5 °C and 40 °C/41 and
104 °F. (The battery will not recharge if the ambi-
ent temperature is outside of this range.)
8
Getting Started