Table of Contents
Advertisement
2. Make sure that the second option "Driver from disk provided by hardware manufacturer"
is checked.
3. Press the OK button. The
screen shown on the right
appears.
4. Insert the supplied disk for Windows 95 into the floppy disk drive: drive A in most cases.
5. Press the OK button.
6. Follow the instructions that appear on the screen.
Prepare Windows 3.1/3.11 for the Printer
1. Start Windows 3.1/3.11.
2. Insert the supplied disk for Windows into your floppy disk drive.
3. Choose Run from the File menu in the Program Manager.
4. Type the drive name where you
inserted the supplied disk and
"SETUP" in the box: for example,
A:\SETUP. Choose the OK button or
press the Enter key.
5. The installer starts running. Follow the instructions on the computer screen.
12
2 Notes
The installer automatically updates your SYSTEM.INI Windows file by
adding DEVICE=bi-di.386 under the [386Enh] section. If any bi-
directional parallel communications device driver has previously been
installed, it will be deactivated by this new driver. If you want to use the
driver that was previously installed, you should re-install your previous
driver. However, re-installing the previous driver will make the HS-
5000/5300 driver inactive.
The installer makes the installed printer driver the Windows default.
The installer automatically sets the printer port to the parallel interface,
LPT1.
During this installation, changes have been made to the SYSTEM.INI
file. It is necessary to restart Windows so that the changes become
effective and the installed bi-directional parallel communications device
driver can take effect.
Advertisement
Table of Contents
