Sony SCPH-10281 Instruction Manual page 19

US
Connecting with a network cable
Do not connect network cables or telephone cords of the following
types to the NETWORK connector; too much electrical current may
pass through the connector, causing a malfunction, excessive heat
or fire in the connector:
• Network cables of types other than 100Base-TX and 10Base-T
• Normal telephone lines
• The jack of an ISDN (digital) compatible public phone
• PBX phone lines
• Telephone lines for home networks or business phones
• Other types of telephone lines
Telephone line usage
• If a telephone call is received while the modem is in use, the
modem connection may fail or the console may malfunction.
• The modem and the telephone cannot be used at the same time.
Moisture condensation
If brought directly from a cold location to a warm one, moisture
may condense on the outside or inside of the network adaptor.
Should this occur, the network adaptor may not operate properly.
In this case, do not turn on the PlayStation 2 console until the
®
moisture evaporates (this could take several hours). If the console
or network adaptor still does not operate properly after this period
of time, contact our technical support line at 1-800-345-7669 for
assistance.
19