Advertisement
CM430S Confi guration (Point to Point)
Connect a module to your computer and power the module using 12VDC.
Open your browser and enter 192.168.1.200 (Factory set) and press [Enter].
If the unit is reset by the user, then its default address will be 192.168.1.254
A window will be displayed prompting you to enter the password (default = 123456).
After entering the password, the web browser page will be displayed.
Copyright © 2019
i
Please do not modify ADVANCED SETTINGS from default
values.
Note
Figure 1: Point to Point - Location 1
Figure 2: Point to Point - Location 2
E&OE
P/N: CM430SIRG Rev 1.2
Page
3
Advertisement
