Westinghouse Havanna 7254635 Owner's Manual page 8

MOuntInG
9
1
2
With bracket holding fan assembly, attach the male/female plug connection (1) from
the fan to the terminal block. Attach the ground wire (2) from the downrod
to the mounting bracket.
10
1
2
Loosen the 2 screws on the bottom of mounting bracket. (do not remove) Raise the
canopy up and align the keyholes on the bottom of the canopy with the 2 screws
on the bottom of mounting bracket. Rotate the canopy until both screws from the
mounting bracket drop into the slot recesses. Tighten screws securely.
8
SAA-Havanna-Australia-WH18
SeCure tO CeIlInG