Waste Tray; Intergated Seam Guide; Thread Knife; Changing Presser Feet - Husqvarna VIKING Amber S 100 User Manual

Waste tray

The waste tray can be attached to the machine, and it is
used to catch waste trimmings as you sew.
After completion of work, remove the waste tray.
Slots for attaching tray

Intergated seam guide

The integrated seam guide helps you sew straight,
whether sewing seams or edges. Fabric is placed along
the edge of the guide. The guide is adjustable and can
be set for desired seam allowance.

Thread knife

The thread knife is built in, toward the back side of the
face cover. Draw the thread chain toward the rear and
cut off excess threads with the thread knife, as shown.

Changing presser feet

Be sure needle is in the up position.
Foot release lever
Raise presser foot lever.
1. Push foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning
needle holes.
3. Lower the presser foot lever and push foot release
lever so that the foot holder snaps on the foot.
KNOWING YOUR MACHINE – 11