Specifications - Culligan Aquasential RO Owner's Manual

Specifications

Culligan ® Aquasential
Reverse Osmosis systems' performance are influenced by feed water conditions such as pressure, temperature, TDS levels,
and hardness� The better these incoming conditions, the better the systems will perform at their rated specifications�
Influent Water Characteristics
¹ Rating at 50 psi, 77oF, 500 mg/L TDS influent, without storage tank�
² May vary with pressure� See
exceeds 1000 mg/L (ppm)�
³ A softener is strongly recommended for water over 10 gpg hard� Installing a system without a softener on water
with hardness higher than 10 gpg will reduce the life of the membrane� The Arsenic cartridge must be installed
after the RO membrane� All specialty cartridges must have a Performance Indicator Device (PID) installed to track
gallon usage�
Product Specifications
Length x Width x Height
Power Specifications
Rated System Operating Pressure
Inlet Water Temperature
Daily Production Rate*
Recovery Rating
Storage Tank Capacity
* Depending on local water quality and use environment, the actual filtered water flow rate and total filtered water
volume will vary�
* Recovery rating means the percentage of the influent water to the membrane portion of the systems that are
available to the user as RO treated water when the systems are operated without a storage tank or when the
storage tank is bypassed� The systems' recovery rating has been verified with test data�
* Membrane element specification� System daily production rated to pressurized storage tank 27�8 gpd (Aquasential
RO) and 34�1 gpd (Aquasential Smart RO)�
9
01040605 A 06/21
® RO and Smart RO Advanced Drinking Water Systems
Pressure
Temperature
Total Dissolved Solids (TDS)¹
pH
Chlorine²
Chloramine
Turbidity
Hardness³
Iron
Bacterial Quality
Capillary Flow Restrictor" on page <?>,
Aquasential
N/A
50 gpd*
39�2%
40-120 psi
33° - 100° F
0-2500 ppm
(0-2500 mg/L)
5 - 10
0-3 ppm (0-3 mg/L)
0-3 ppm (0-3 mg/L)
0-10 NTU
0-10 gpg
0-1 ppm (0-1 mg/L)
Potable
for all hard water applications where TDS
®
RO Aquasential
19�0 in x 5�7 in x 17�8 in
12 VDC, 20W
40 - 120 psi
(276 - 827 kPa)
33° - 100° F
75 gpd*
52�8%
3 Gallons
®
Smart RO