Related Manuals for STEINEL PROFESSIONAL IS 2180 ECO
Summary of Contents for STEINEL PROFESSIONAL IS 2180 ECO
- Page 1 STEINEL Vertrieb GmbH Dieselstraße 80-84 33442 Herzebrock-Clarholz Tel: +49/5245/448-188 www.steinel.de Contact www.steinel.de/contact Information IS 2180 ECO – 3 –...
-
Page 2: System Components
Principle GB Installation instructions The IS 2180 ECO is light) con-nected to it. Heat angle of 180°. The lens can equipped with two 120° is not detected through be removed and turned, Dear Customer, pyro sensors which detect obstacles, such as walls thereby permitting two max. -
Page 3: Installation/Wall Mounting
b) Connect service lead Connect the protective- 10. Locate front cover Installation/Wall mounting The service supply lead earth conductor to the and fi t security screw to the light is also a 2 to earth contact ( protect cover from unau- The site of installation 3-core cable. - Page 4 Basic reach settings Precision adjustment using shrouds The lens of the IS 2180 ECO Using a screwdriver, the Shrouds may be used to is divided into two detection lens can be unclipped from defi ne the detection zone zones. One half covers the groove at the side and exactly as you require in a max.
-
Page 5: Wiring Examples
Wiring examples Troubleshooting Malfunction Cause Remedy IS 2180 ECO without power Fuse faulty; not switched Renew fuse, switch on L´ mains power switch, L´ check wiring with voltage tester Short circuit Check connections Mains switch OFF Switch on IS 2180 ECO will not switch Twilight control set to Adjust setting nighttime mode during... -
Page 6: Manufacturer's Warranty
If you have a warranty claim We guarantee that your product designation, either or would like to ask any STEINEL Professional to your retailer or contact us question regarding your sensor product will remain at STEINEL (UK) Limited,...
Need help?
Do you have a question about the IS 2180 ECO and is the answer not in the manual?
Questions and answers