Connect To Your Tablet Device - Mattel Monster Maker Manual

Setup
Remove the cardboard sleeve from the mechanism and discard.
Connect to your device
Find your device below and follow the instructions to connect to the Monster Maker.
IPad® devices
1. Turn the Monster Maker on. The
connection light will blink blue.
Back View
3. Touch "Bluetooth" then move the slider to "On".
Airplane Mode
Bluetooth
Wi-Fi
DEVICES
Bluetooth On
MH Monster Maker
When your iPad detects the Monster Maker, "MH Monster Maker" will appear in the Devices list.
Touch "MH Monster Maker" to pair with your iPad.
2. Pair with Bluetooth® wireless technology.
Touch the settings icon on your iPad.
You only need to complete Bluetooth pairing the
first time you use your iPad with Monster Maker.
Connected
6
4. Installing the app
App Not Installed
The accessory "MH Monster Maker"
Once Monster Maker pairs with your iPad, a dialog box
uses an app you do not have
will prompt you to go to the App Store to download the
installed. Would you like to get it
free app. The connection light will stop blinking and
from the App Store?
glow a steady blue.
lgnore
App Store
Touch "App Store" and you will be taken to the App Store page where you can download the free Monster High Monster Maker app.
Monster Maker prompts you to download the app only the first time you pair with your iPad. If you touch "Ignore" at that time, you
will need to go to the App Store on your own, search for Monster High Monster Maker and download the free app.
5. Touch the Monster Maker app icon on your home screen to launch the app.
Android devices
Note that the connection process may vary slightly depending on your Android device.
1. Go to the Google Play store to download the free Monster High Monster Maker app.
2. Turn the Monster Maker on. The connection light will blink blue.
3. Touch the settings icon on your Android device.
4. Turn on Bluetooth.
5. Touch "MH Monster Maker" to pair with your device. The connection light will stop blinking and glow a steady blue.
6. Touch the Monster Maker app icon on your home screen to launch the app.
Windows or Mac computer
1. Remove the USB cover.
2. Connect a USB A-to-B printer cable (not included) to the Monster Maker and your computer.
3. Turn the Monster Maker on. The connection light will glow a steady blue.
4. Go to www.monsterhigh.com/monster-maker to download the design software.
5. Install and launch the design software.
Back View
7