Gavita Pro SL2 Series Manual

Pro line
SL2
Gavita
®
1 Introduction
Thank you for purchasing the Gavita
and also describes how to use the product. Please read and understand this manual completely before using the product. Only
use the product as specified in this manual.
1.1 Used Symbols
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried
out as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve
as a reminder to the user.
Note: A note gives additional information, e.g. fo r a procedure.
This symbol indicates that the reflector and lamp can reach very high temperatures (>85 °Celsius / >185 °Fahrenheit).
Observe a cool down period before performing maintenance.
This symbol is an internationally recognized symbol used to designate recyclable materials.
This symbol is an authorized use mark employed on electronic products manufactured or sold in the United States
which indicates that the electromagnetic emissions from the device is under limits published by the Federal
Communications Commission. The FCC logo is a mark that declares that the equipment is authorized to market and
operate under the FCC's SDOC procedure.
This symbol shows that a product has been independently tested and certified to meet recognized standards for safety.
The symbol on the material, accessories or packaging indicates that this product may not be discarded as household
waste. By disposing of the equipment in the proper way, you will be helping to prevent possible risks to the environment
and public health, which might otherwise be caused by improper handling of the discarded equipment. Recycling of
materials contributes to the conservation of natural resources. Therefore, please do not dispose of your old electronics
and electrical appliances via household waste.
A
B
This symbol indicates the minimum distance (B) between the fixture (A) and the lit surface.
• Hazardous optical radiation may be emitted from the light source. Do not stare at operating
lamp. May be harmful to the eyes.
• UV may be emitted from the light source. Eye or skin irritation may result from exposure.
Use appropriate sheilding.
• IR may be emitted from the light source. Do not stare at operating lamp.
• Un rayonnement optique dangereux peut être émis par la source lumineuse. Ne regardez pas
la source lumineuse quand elle est allumée. Peut être nocif pour les yeux.
• La source lumineuse peut émettre des rayons UV. L'exposition peut provoquer une irritation
des yeux ou de la peau. Utilisez un écran approprié.
• La source lumineuse peut émettre des rayons infrarouges. Ne regardez pas la source
lumineuse quand elle est allumée.
Photobiological Safety
These photobiological safety markings are based on testing of the light output characteristics of a single horticultural
luminaire. Increased exposure risk to facility personnel may be present depending upon the number of horticultural
luminaires and their placement "and/or" positioning within the plant growth facility. It is the responsibility of the plant
growth facility to address these risks at the facility level and to ensure that people entering the plant growth areas
while the lights are on, are aware of these risks and that appropriate safeguards are in place.
1000e 208-240 V
SL2 1000e 208-240 V. This manual describes the mounting and installing of the product
®
WARNING - POSSIBLE RISK OF INJURY TO EYES AND SKIN
AVERTISSEMENT – RISQUE DE BLESSURE POSSIBLE AUX YEUX ET À LA PEAU