Download Print this page

Advertisement

Quick Links

Pro
line
Pro
Gavita
1.
Introduction
Thank you for purchasing the Gavita Pro 750
completely before using the product. Only use the product as specified in this manual.
1.1.
Used symbols
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried out
as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve as
a reminder to the user.
Note: A note gives additional information, e.g. for a procedure.
This symbol indicates that the reflector and lamp can reach very high temperatures (>85 °Celsius / >185 °Fahrenheit).
Mind a cool down period before performing maintenance.
The symbol on the material, accessories or packaging indicates that this product may not be discarded as household
waste. By disposing of the equipment in the proper way, you will be helping to prevent possible risks to the environment
and public health, which might otherwise be caused by improper handling of the discarded equipment. Recycling of
materials contributes to the conservation of natural resources. Therefore, please do not dispose of your old electronics
and electrical appliances via household waste.
This symbol is an internationally recognized symbol used to designate recyclable materials.
This symbol is a certification mark employed on electronic products manufactured or sold in the United States which
certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications
Commission.
This symbol shows that a product has been independently tested and certified to meet recognized standards for safety.
This symbol indicates the minimum distance (B) between the fixturetype (A) and the lid surface.
A
B
2.
Product description
The Gavita Pro 750
be used to drive a double ended 750 W 400 V high frequency (electronic) high pressure sodium lamp. The Gavita Pro 1000
US can be used to drive a double ended 1000 W 400 V high frequency (electronic) high pressure sodium lamp.
The Gavita Pro 750
by a Gavita Master controller. The controller can automatically switch the fixture on and off during a 24 hour cycle.
The controller also offers a temperature safety feature, dimming or switching off connected fixtures when the temperature in a
climate room becomes too high.
The product can also be controlled by hand or by conventional timers in combination with a contactor.
In this manual, the Gavita Pro 750
3.
Product information and specifications
3.1.
General product information
Product name
Manufacturer
Version
EAN Code
Part number
Plug type
e
750 / 1000 DE US
e
DE US or the Gavita Pro 1000
DE US and the Gavita Pro 1000
e
DE and the Gavita Pro 1000
e
e
DE US and the Gavita Pro 1000
e
Pro 750
Gavita Holland bv
120 V
8718403053272
18.60.74.14.20
Nema 5-15
e
e
DE US. Please read and understand this manual
DE US are adjustable horticultural fixtures. The Gavita Pro 750
e
DE are e-series products. They can be remotely switched and adjusted
DE US will be referred to as: "the fixture".
e
120/240 DE US
e
240 V
Nema 6-15
Pro 1000
120/240 DE US
e
120 V
240 V
8718403053333
18.60.14.14.20
Nema 5-15
Nema 6-15
DE US can
e
e
DE

Advertisement

loading

Summary of Contents for Gavita Pro 750e DE US

  • Page 1 DE US can be used to drive a double ended 750 W 400 V high frequency (electronic) high pressure sodium lamp. The Gavita Pro 1000 US can be used to drive a double ended 1000 W 400 V high frequency (electronic) high pressure sodium lamp.
  • Page 2 The product is meant for use in climate rooms. The product may be used in damp environments. The product may not be used in wet environments or outdoors. The Gavita Pro 750 W and 1000 W lamps function optimal when the ambient temperature is between 20 ~ 30 °Celsius / 68 ~ 86 °Fahrenheit.
  • Page 3: Safety Recommendations And Warnings

    • Do not use the fixture when either its lamp or its power cord are damaged. Replace the power cord only with original certified cords. Replace the lamp only with lamps specified by Gavita (see paragraph 3.3). • The use of other lamps may damage the product and lamp and will void the warranty.
  • Page 4: Installing The Fixture

    For more information on connecting fixtures to a controller, consult the controller manual. • Switch the power selector knob on the Gavita ballast to the “EXT” (5) position. • Connect the controller to the included RJ14 splitter (4D) using the controller’s connection cable (4C).
  • Page 5: Status Indications

    Troubleshoot using the status LED The multi colour status LED provides information on the condition of the controller and the lamp. Consult table 1 and 2 to interpret the status LED. LED signals are represented by colored dots. - All operating modes include GREEN; - All warning codes include RED;...
  • Page 6 Caution! Do not touch the lamp with bare hands as this will damage the lamp. Always use a fabric glove to handle the lamp. Caution! Only use lamps specified by Gavita (see paragraph 3.3). Note: The lamp must be replaced every year or after 5000 lighting hours, whichever one comes first.
  • Page 7 For HPS lamps the warranty period is one (1) year from the original date of purchase. In case Gavita Holland decides to replace the entire product, this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e.

This manual is also suitable for:

Pro 1000e de usPro 750e 120/240 de usPro 1000e 120/240 de us