Setting Your Changes As The New Default; Restoring All Settings To The Factory Settings; Scan To A Memory Card Or Usb Flash Memory Drive; Glass Scan Size - Brother MFC-J6510DW Advanced User's Manual

Chapter 8
Setting your changes as the
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
True2Life, Cropping, Borderless and
Print Date, that you have changed, to the
factory settings.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
62
Scan to a memory card
or USB Flash memory
8
drive

Glass Scan Size

To scan a Legal, Ledger, A3 or A4 size
document, you need to change the
Glass ScanSize setting. The default
setting is Letter.
a
Press
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Glass ScanSize.
d
Press d or c to choose Letter, Legal,
Ledger, A3 or A4.
8 Press OK.
Note
• You can save the setting you use most
often by setting it as the default. (See

Setting your changes as the new default

on page 62.)
• This setting is only available for scanning
documents from the scanner glass.
(SCAN).
8
8