Install Ink Cartridges - Brother MFC-J265w Install Manual

4
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
a
Make sure that the power is turned on.
The LCD shows No Ink Cartridge.
b
Open the ink cartridge cover a.
c
Remove the green protective part a.
Note
Do not throw away the green protective part. You
will need it if you transport the machine.
d
Unpack the ink cartridge.
Note
Make sure you install the Starter Ink Cartridges
included with your machine first.
1
1
e
Turn the green knob on the protective yellow
cap clockwise until it clicks to release the
vacuum seal, then remove the cap a.
f
Take care to match the color of the lever a
with the cartridge color b, as shown in the
diagram below.
g
Install each ink cartridge in the direction of the
arrow on the label.
1
1
2
5