Changing Default Settings - Brother MFC-9760 Owner's Manual
Brother mfc-9760: user guide
Hide thumbs
Also See for MFC-9760:
- Parts reference list (31 pages) ,
- Quick setup manual (4 pages) ,
- Service manual (255 pages)
Table of Contents
Advertisement
Changing Default Settings
Press Menu/Set, 2 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu/Set. Adjust the Copy Mode and Contrast and Paper Type
settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press
to move through the selections for each setting. Press Menu/Set to save your selection. Press Stop
—OR—Press
to select the next setting you want to change.
Press Menu/Set, and 2.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
Copy Mode (Type of Document)
You can select the Copy resolution for your type of document. The default setting is AUTO, which
is used for documents that contain both text and photographs. TEXT is used for documents
containing only text. PHOTO is used for copying photographs.
1
Press Menu/Set, 2, 1.
2
Press
or
to choose the type of document (AUTO, TEXT or PHOTO), and then press
Menu/Set.
3
Press Stop—OR—Press
AUTO
TEXT
PHOTO
–
THIN
PLAIN
THICK
THICKER
or
for additional settings.
+
is default
Making Copies
or
21
Advertisement
Table of Contents
