Brother MFC-9760 Owner's Manual page 79

ERROR MESSAGE
OUT OF MEMORY
(When the machine is
used as a printer.)
OUT OF MEMORY
(When the machine is
used as a copier.)
PAPER JAM
PLS CLEAN DRUM
PLS OPEN COVER
TONER EMPTY
CAUSE
The machine memory capacity has
been exceeded.
The machine memory capacity has
been exceeded.
The recording paper is jammed in the
machine.
The primary corona wire of drum unit
is dirty.
A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
ACTION
- Press Reset to delete data
remaining in the memory of
the machine.
- If you have installed the
®
Windows driver, try again
after setting the True Type
mode to "Print as Graphics" in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
- Expand the printer memory
with the optional memory
board.
See Out of Memory Message, page
14.
See Printer Jam or Paper Jam,
page 74.
Clean the primary corona wire of
drum unit. (See Cleaning the
Drum Unit, page 83.)
Open the front cover and remove
the drum unit. If you see any
jammed paper or other item, gently
pull it out. Reinstall the drum unit,
then close the front cover. If the
error message remains, open and
close the front cover again. If the
machine cannot reset itself and
return to copy status prompt, it will
display MACHINE ERROR XX.
Then contact your Brother dealer
for service.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 84.)
Troubleshooting and Maintenance
73