Packing And Shipping The Machine - Brother MFC-9460CDN Advanced User's Manual

Packing and shipping
the machine
WARNING
This machine is heavy and weighs
approximately 58.4 lb (26.5 kg). To prevent
possible injuries at least two people should
lift the machine. Be careful not to pinch your
fingers when you put the machine down.
If you use a Lower Tray, carry it separately
from your machine.
IMPORTANT
When shipping the machine, the waste
toner box must be removed from the
machine and put in a plastic bag, and then
sealed. Failure to remove it and put it in a
plastic bag before shipping may cause
severe damage to the machine and may
void the warranty.
76
Note
• If for any reason you must ship your
A
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts, including the drum unit, the toner
cartridges, and printed materials to use
with your 'Exchange' machine.
Make sure that you have the following parts
for repacking:
1
1 Plastic bag for the waste toner box
2 Orange packing materials for locking the
internal parts (4 pieces)
3 A piece of paper (Letter or A4) to protect the
belt unit (supplied by the user)
2
3