Front Panel Setup
Colour File Type for Scan to E-mail (E-mail server)
You can select the default colour file type for Scan to E-mail (E-mail server) function.
1
6
Press Menu/Set,
2
to select PDF or JPEG.
Press
▲
or
▼
3
Press Menu/Set.
4
Press Stop/Exit.
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
1
Make sure the machine is not operating, then disconnect all the cables from the machine (except power
cable).
2
Press Menu/Set, 6, 0.
3
Press 1 to select Reset.
4
Press 1 to select Yes.
5
The machine will re-start, re-connect cables once this is complete.
Printing the Network Configuration List
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
"BRN_xxxxxx" ("xxxxxx" is the last six digits of Ethernet address.).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
1
Press Menu/Set, 5, 6
2
Press Mono Start or Colour Start.
7, 2
,
.
3
3 - 16