Dns Server; Apipa - Brother MFC-9420CN Network User's Manual

Multi-protocol on-board multi-function print server
Hide thumbs Also See for MFC-9420CN:
Table of Contents

Advertisement

Front Panel Setup

DNS Server

1
Press Menu/Set, 6, 1, 8.
2
Press
or
to select Primary or Secondary.
3
Press Menu/Set.
4
Enter the DNS Server address.
5
Press Menu/Set.
6
Press Stop/Exit.
Primary DNS Server IP Address
This field specifies the IP address of the primary DNS (Domain Name Service) server.
Secondary DNS Server IP Address
This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server.

APIPA

When enabled, the print server will automatically allocate a IP address in the range (169.254.1.0 -
169.254.254.255) when the print server cannot obtain an IP address through the BOOT Method you have set
(Menu/Set, 6, 1, 1). Selecting Off means the IP address doesn't change, when the print server cannot obtain
an IP address through the BOOT Method you have set.
1
Press Menu/Set, 6, 1, 9.
2
Press
or
to select On or Off.
3
Press Menu/Set.
4
Press Stop/Exit.
3
3 - 6

Advertisement

Table of Contents
loading

Table of Contents