Making N In 1 Copies Or A Poster - Brother MFC-8460N User Manual

f
Choose one of the options below:
Press a or b to select the
enlargement or reduction ratio you
want. Press OK.
Press a or b to select Custom (25–
400%). Press OK. Use the dial pad
to enter an enlargement or reduction
ratio from 25% to 400%. (For
example, press 5 3 to enter 53%.)
Press OK.
g
Press Start.
Note
• The Auto setting is available only when
loading from the ADF.
• Page Layout Options 2 in 1(P), 2 in 1(L), 4
in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
(P) means Portrait and (L) means
Landscape.
Making N in 1 copies or a
poster
You can reduce the amount of paper used
when copying by using the N in 1 copy feature.
This allows you to copy two or four pages onto
one page, which lets you save paper.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
Please make sure the paper size is set to
Letter, A4, Legal or Folio.
(P) means Portrait and (L) means
Landscape.
You can only use the N in 1 copy and
poster feature with 100% copy size.
You can only make one poster copy at a
time.
a
Make sure you are in Copy mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press N in 1.
e
Press a or b to select 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L), Poster (3 x 3) or Off
(1 in 1).
Press OK.
f
Press Start to scan the page.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to g.
g
After the machine scans the page, press
1 to scan the next page.
12
Flatbed Copy:
Next Page?
a 1.Yes
b 2.No
Select ab
h
Put the next page on the scanner glass.
Press OK.
Repeat g and h for each page of the
layout.
i
After all the pages have been scanned,
press 2 to finish.
12
Making copies
& OK
12
81