Brother MFC-8460N User Manual page 108

o
This product should be connected to an
AC power source within the range
indicated on the rating label. Do NOT
connect it to a DC power source. If you
are not sure, contact a qualified
electrician.
p
This product is equipped with a 3-wire
earthed plug. This plug will fit into only
an earthed socket. This is a safety
feature. If you are unable to insert the
plug into the outlet, contact your
electrician to replace your obsolete
socket. Do not defeat the purpose of an
earthed plug.
q
Do not place anything on top of the
power cord including this machine. Do
not allow the power cord to be stepped
on.
r
Do not place anything in front of the
machine that will block received faxes.
Do not place anything in the path of
received faxes.
s
Do not touch a document during
printing.
t
Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or
short out parts resulting in a risk of fire or
electric shock. Never spill liquid of any
kind on the product.
u
Do not attempt to service this product
yourself, because opening or removing
covers may expose you to dangerous
voltage points and/or other risks. Refer
all servicing to service personnel.
v
Unplug this product from the mains
power and telephone line sockets, and
refer servicing to qualified Service
Personnel under the following
conditions:
If the power cord is damaged or
frayed.
If liquid has been spilled into the
product.
If the product has been exposed to
rain or water.
If the product does not operate
normally when the operating
instructions are followed. Adjust only
those controls that are covered by
the operating instructions. Incorrect
adjustment of other controls may
result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal operation.
If the product has been dropped or
the cabinet has been damaged.
If the product exhibits a distinct
change in performance, indicating a
need for service.
w
This unit will only work in conjunction
with a tone signalling (DTMF)
telephone, but some telephones are not
compatible. Since noise or speech from
the telephone can upset dialling from
this unit, errors may result if the devices
are used together in other than quiet
conditions.
x
Where it is necessary to dial prefix
digits, such as a Caller Display override
code ("0196" or "0197"), this unit will
have to be used in conjunction with an
associated tone signalling (DTMF)
telephone.
y
Note that some telephones are not
compatible with this unit and dialling
errors may result if the two devices are
used together in other than quiet
conditions. The Telecom Faults Service
is not to be called should such problems
arise. In such cases, it is recommended
that the prefix and wanted number are
dialled manually.
z
This equipment may not provide for the
effective hand-over of a call to another
device connected to the same line.
Safety and Legal
99