Important Information For Australia; Important-For Your Safety; International Energy Star ® Compliance Statement; Important Safety Instructions - Brother MFC-8460N User Manual

Important Information
for Australia

IMPORTANT-For Your Safety

To ensure safe operation the three-pin plug
supplied must be inserted only into a
standard three-pin power point which is
effectively grounded through the normal
household wiring.
Extension cords used with the equipment
must be three-conductor and be correctly
wired to provide connection to ground.
Incorrectly wired extension cords are a major
cause of fatalities.
The fact that the equipment operates
satisfactorily does not imply that the power is
grounded and that the installation is
completely safe. For your safety, if in any
doubt about the effective grounding of the
power, consult a qualified electrician.
International E
NERGY
Compliance Statement
The purpose of the International E
Program is to promote the development and
popularization of energy-efficient office
equipment.
®
As an E S Partner, Brother
NERGY TAR
Industries, Ltd. has determined that this
product meets the Energy Star® guidelines
for energy efficiency.
96

Important safety instructions

a
A
b
A
c
d
e
f
g
®
S
TAR
A
®
S
NERGY TAR
h
Read all of these instructions.
Save them for later reference.
Follow all warnings and instructions
marked on the product.
Unplug this product from the wall socket
before cleaning the outside of the
machine and the scanner glass. Do not
use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
Do not use this product near water.
Do not place this product on an unstable
cart, stand, or table. The product may
fall, causing serious damage to the
product.
Slots and openings in the cabinet at the
back or bottom are provided for
ventilation; to ensure reliable operation
of the product and to protect it from
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should
never be placed near or over a radiator
or heater. This product should never be
placed in a built-in installation unless
adequate ventilation is provided.
This product should be connected to an
AC power source within the range
indicated on the rating label. Do NOT
connect it to a DC power source. If you
are not sure, contact a qualified
electrician.
A