Adjusting The Tracking Of The Front Caster - Titan POWRLINER PL4955 Service Manual

Repairs
2.2

Adjusting the Tracking of the Front Caster

The front caster is set by the factory to track in a straight line. Use the
following procedure if adjustment the caster becomes necessary.
1. Loosen the two hex screws (1) in the top of the caster
mounting bracket (2).
2. Turn the caster mounting bracket (2) slightly in the desired
direction.
i
The front caster locking pin must be engaged during
tracking adjustment.
3. Tighten the two hex screws (1).
4. Check the tracking of the front caster (3). If the caster does not
track straight, repeat the above procedure.
2
1
3
GB
6 PowrLiner