Troubleshooting - Philips CID2680 User Manual

12 Troubleshooting

Warning
‡ Never remove the casing of this apparatus.
7R NHHS WKH ZDUUDQW\ YDOLG QHYHU WU\ WR UHSDLU
the system yourself.
If you encounter problems when using this
DSSDUDWXV FKHFN WKH IROORZLQJ SRLQWV EHIRUH
requesting service. If the problem remains
XQVROYHG JR WR WKH 3KLOLSV ZHE VLWH
(www.philips.com/welcome). When you
FRQWDFW 3KLOLSV HQVXUH WKDW WKH DSSDUDWXV
is nearby and the model number and serial
number are available.
No power
‡ Car engine has not been started. Start
the car engine.
‡ Connections is incorrect.
‡ Fuse has been damaged. Replace fuse
(see 'Replace fuse' on page 39).
No sound
‡ Volume is too low. Adjust volume.
‡ Speaker connections is incorrect.
No response to the remote control
‡ Ensure that the path between the remote
control and the unit is clear from obstacles.
‡ )URP D FORVH GLVWDQFH SRLQW WKH UHPRWH
control directly at the unit.
‡ Switch F/R to correct position (F for front
control and R for rear control).
‡ The function does not work. Refer to the
instructions.
‡ Replace the remote control battery.
Disc does not play
‡ Disc is upside down. Ensure the printed
side is upwards.
‡ 'LVF LV GLUW\ &OHDQ WKH GLVF ZLWK D FOHDQ
VRIW OLQWIUHH FORWK :LSH WKH GLVF RXWZDUGV
from the center.
‡ Disc is defective. Try another disc.
‡ incompatible disc is used. Try another disc.
All manuals and user guides at all-guides.com
‡ Disc rating exceeds the restrict setting.
Change the rating settings to lower one.
‡ Disc region code is not compatible with
the unit. Use disc with proper region code.
No image
‡ Parking brake wire connection is incorrect.
Check the parking wiring.
,PDJH ÁDVKHV RU GLVWRUWHG
‡ Video DVD settings do not match with
the DVD. Adjust video DVD settings.
‡ Video connection is improper. Check the
connections.
Noise in broadcasts.
‡ Signals are too weak. Select other stations
with stronger signals.
‡ Check the connection of the car antenna.
‡ Change broadcast from stereo to mono.
Preset stations lost.
‡ Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
‡ The Fuse type is incorrect. Replace it with
a 15A fuse.
‡ Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
‡ USB/SD/MMC data error. Check the USB
device or SD/MMC card.
EN 39