3. User interface Description of display icons and indicators below: Function Description Recording status Light blinks when recording begins. indicator Current record time Displays length of the current recording. Resolution indicator Displays video resolution status. Voice recording Indicates if voice recording is on or off. indicator Motion detection The icon appears when the motion detection function is...
Start/Stop Press the Start/Stop button to start or stop the video recording. Playback Press the Playback button to preview recorded video. Menu Press the Menu button to enter menu settings. 4. System setting Press the menu button to see the list of adjustable system settings below. Function Description Resolution...
Default Reset all device settings to the factory default. About Information on the current firmware version. 5. Operating instructions 5.1 Power on/off and reset button 5.1.1 Automatic power on/off Your dash cam will automatically turn on when you switch on the vehicle engine. If you disconnect the car charger or the cable plugged into the device, the camera will automatically turn off.
5.2.4 Exit video play mode To exit the video playback mode, press the emergency button and you will enter video recording mode. 5.3 Record video 5.3.1 Normal video recording When you switch on your vehicle, the device automatically turns on and starts continuously recording.
7.1 Firmware download To update the firmware (the device’s in-built software), please download the latest file version from Philips.com or contact Philips Consumer Care for assistance. 7.2 How to update firmware 1. Copy the firmware file (ADR620EU.bin) directly to your SD memory card.
8. Technical specifications Functions Automatic video recording Collision detection & emergency file protection Seamless loop recording Auto exposure Auto white balance Date and time stamp Auto LCD off Driver fatigue alert and fatigue index display Wide angle video recording Headlight reminding Image sensor 2 Mega-pixels CMOS Video resolution...