These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. Caution This unit is designed for negative ground (earth) 12 V DC operation only.
Mount in the dashboard Note Check wire connection before you mount the unit into a car. If preset radio stations are lost when the ignition key is turned OFF and then back ON, reconnect the red leads crosswise to the yellow ones. If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.
Touch to set year, month and day. Set clock mode Touch [Clock mode]. Touch on [12Hr] or [24Hr] to select clock mode. Set time Touch [Time]. Touch on the displayed time. » A submenu is displayed. Touch to set hour and minute. When date/time is set, touch then touch to return to main menu.
Play disc You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW Audio CD, CD-R, CD-RW Note Ensure that the disc contains playable content. Insert the disc into the disc slot with label side facing up. »...
Touch [Bluetooth]. » The Bluetooth menu is displayed. Touch to select the paired phone, then touch Touch to search for phone number from the following list: Or touch to dial number directly, then touch to dial. Receive call By default, all incoming calls are received automatically.