Bradmin Light Utility (For Mac Os X Users) - Brother MFC-495CW Quick Setup Manual

For Network Users

BRAdmin Light utility (for Mac OS X users)

BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother
products on your network, view the status and configure basic network settings, such as IP address from a
computer running Mac OS X 10.3.9 - 10.5.x.
The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already
installed the printer driver, you don't have to install BRAdmin Light again. For more information on BRAdmin Light,
visit us at http://solutions.brother.com/.
Set your IP address, Subnet Mask
and Gateway using BRAdmin Light
Note
• If you have a DHCP/BOOTP/RARP server in
your network, you don't have to do the
following operation. The machine will
automatically obtain its own IP address.
• Make sure that version 1.4.2 or later of Java™
client software is installed on your computer.
a
Double-click the Macintosh HD icon on your
desktop.
b
Choose Library, Printers, Brother and then
Utilities.
c
Double-click the file BRAdmin Light.jar and
run the software. BRAdmin Light will then
search for new devices automatically.
44
d
Double-click the unconfigured device.
e
Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click OK.
f
The address information will be saved to the
machine.