ENG
3.
Mounting
CAUTION
Risk of injury caused by a falling lumi-
naire.
Personalinjuryandmaterialdamage.
X Useonlythedeliveredfasteningele-
ments or other suitable fastening
elements available from the man-
ufacturer.
X Mountthefasteningelementscor-
rectly.
3.1
Mounting types
Depending on the luminaire model, the
luminaireismountedindifferentways.
Thefollowingmountingtypesarepossible:
Mountingtype"Top,fixed"
Mountingtype"Top,suspended"
Mountingtype"Lateral"
If you want to determine the luminaire
model, see chapter 2"Model overview" ,
page25.
3.2
Mounting the side parts
I
Fig.1:Preparingthecablebushing.
26
II
III
X Remove the cable bushing at the
notches in positions I, II or III, where
the connecting cable is to emerge
fromtheluminaire,usingapairofpli-
ers,seeFig.1
Fig.2:Positioningthegrommet.
X Guide the connecting cable through
thecablebushingandslidethegrom-
metintothecablebushing,seeFig.2.
Fig.3:Mountingthesidepart.
Fig.4:Sidepartandgrommetmounted.
X Mount the side part B using the
enclosedscrewsA,seeFig.3andsee
Fig.4.
X Mountthesecondsidepartontheother
sideoftheluminaire.
Mounting
A
B