Table of Contents
Advertisement
Available languages
Available languages
9.
Secure with screws
2 x
Ø 5 x 45mm
Fasten the hood with 2-5 x 45 mm screws on the top and
■
2-4 x 45 mm screws with flat washers at the bottom as
shown.
Making Electrical Connection
1.
Remove tape
Remove the tape holding the electrical box in the hood.
■
12
2 x
Ø 5 x 45mm
2.
Mount electrical box
Slide the electrical box onto the screws provided and tighten
■
it with a flat head screwdriver.
Tip: Use a manual driver for this operation.
3.
Connect the power cord
Insert the connector into the slot provided on the electrical
■
box.
Advertisement
Table of Contents
