Jenn-Air SEL0137247 Installation Instructions And Use & Care Manual page 11

3.
Place hood on mounting screw
Using 2 or more people, hang the range hood on the
■
mounting screw through the mounting slot on the back of the
hood.
4.
Level hood
Use a level to ensure the hood is level before proceeding.
■
5.
Mark mounting hole
Once you have the hood aligned properly, use a pencil to
■
mark 4 holes as shown in the picture.
6.
Remove hood
Using 2 or more people, remove the hood.
■
7.
Drill holes and attach anchors
Drill 4-8 mm holes and install the 8 mm anchors provided.
■
8.
Mount range hood
Using 2 or more people, hang the range hood on the
■
mounting screw through the mounting slot on the back of the
hood.
11