Cleaning And Maintenance; Tecnical Data - OEM AS/T Operating And Service Manual - Spare Parts

7 - CLEANING AND MAINTENANCE

Before starting any cleaning and/or maintenance procedures, disconnect the
machine from the power supply in omnipolar way. The machine shall be cleaned
every day with water and soap, then rinse with a lot of water and carefully dry.
Absolutely avoid to clean using steel wools, brushes or scrapers made of common
steel, as they could leave ferrous particles, which could create rust points. Do not
utilize blades, which could cause damages or surface roughness.
WARNING: do not wash the equipment using direct water jet or water jets under pressure,
because possible penetrations to electrical components could jeopardize the normal
function of the equipment and of the safety systems, as well.
Particular maintenance procedures are not necessary, but we suggest a check of the
machine by skilled personnel every 4 years. A good maintenance assures a perfect
functioning and a long life of the machine.

TECNICAL DATA

MOD
AS / T
12
VOLTAGE
V - AC
380...400/V3N~
230 ~ 3
230 ~ 1
ELECTRIC
CONNECTION
POWER
Kw
0,37
0,37
0,37
CABLE
(Tipo H07RNF)
5 x 1,5 mm
2
4 x 1,5 mm
2
3 x 1,5 mm
2
AS / T