Selecting A Receive Mode (Mfc-620Cn Only); Setting Up The Tad (Mfc-620Cn Only) - Brother MFC-210C Quick Setup Manual

Selecting a Receive
10
Mode (MFC-620CN only)
There are three possible receive modes:
and Manual.
Fax/Tel
Do you want to
receive a fax
automatically?
No
Yes
Do you use the
MFC
for the fax use only?
Yes
No
1
Press Menu/Set.
2
Press 0.
3
Press 1.
4
▲ ▼
Press or to select the mode.
5
Press Menu/Set.
6
Press Stop/Exit.
For more details, see "Setup Receive" in
Chapter 4 of the User's Guide.
Fax Only,
Manual
You control the phone line
and must answer every call
yourself.
Fax Only
The MFC automatically
answers every call as a fax.
Fax/Tel
The MFC controls the line
and automatically answers
every call. If the call is not a
fax, it will ring for you to pick
up the call.
Setting Up the TAD
11
(MFC-620CN only)
You must record an outgoing message in order to use
the TAD mode.
1
Record TAD Outgoing Message (TAD
MESSAGE).
See "Recording TAD Outgoing Message"
in Chapter 7 of the User's Guide.
2
Active TAD mode.
Press and hold
LCD shows:
Light
If the TAD Mode is ON, it over rides your
Receive Mode setting. The built-in digital
TAD answers voice calls. If the call is a fax,
you can receive a fax automatically.
For more details, see "TAD" in Chapter 7 of
the User's Guide.
Continue to Step 2, Installing
the Driver & Software
until it lights and the
MC:Msg Ctr
11