Clean The Filter Canister - Polaris EN27 Series Owner's Manual

|
Robotic Pool Cleaner Owner's Manual
4. Remove the cleaner from the pool and
untangle all kinks and coils in the power
cable. Start at the cleaner head. Lay the
cable in the sun to loosen any tangling
memory (Figure 10).
Figure 10. Untangle the power cable

Clean the Filter Canister

The filter canister should be cleaned at the end of
each cycle.
1. Remove the cleaner from the water and let
the remaining water drain.
2. Unlatch the cleaner cover to access the
canister
(Figure 11).
Figure 11. Lift Cleaner Cover
3. Remove the filter canister from the body
(Figure 12).
Figure 12. Remove Filter Canister
5. Empty all debris from the filter canister,
then rinse the canister and the cleaner
using a hose (Figure 13).
Figure 13. Wash Filter Canister
NOTE: Periodically, deep-clean the filter canister with soapy
water and a soft bristle brush to prevent clogging.
11