How To Scan To A Memory Card Or Usb Flash Memory Drive - Brother DCP-385C User Manual

Chapter 5
How to scan to a memory card
or USB Flash memory drive
You can scan black & white and color
documents into a memory card or USB Flash
memory drive. Black & white documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Color documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 150 dpi and
the default file format is PDF. File names
default to the current date that you set using
the control panel keys. (For details, see Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
07010905.PDF. You can change the color
and quality.
Quality
Color 150 dpi
Color 300 dpi
Color 600 dpi
B/W 200x100 dpi
B/W 200 dpi
a
Insert a CompactFlash
®
Stick , Memory Stick Pro™, SD, SDHC,
xD-Picture Card™ or USB Flash
memory drive into your machine.
CAUTION
DO NOT take out the memory card or USB
Flash memory card while Photo Capture is
blinking to avoid damaging the card, USB
Flash memory drive, or data stored on
them.
b
Load your document.
c
Press (Scan).
d
Press a or b to choose
Scan to Media.
Press OK.
50
5
Selectable File
Format
JPEG / PDF
JPEG / PDF
JPEG / PDF
TIFF / PDF
TIFF / PDF
®
, Memory
e
Do one of the following.
To change the quality, press a or b to
choose Quality. Go to step f.
Press Black Start or Color Start to
start scanning without changing
additional settings.
f
Press d or c to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
g
Do one of the following.
To change the file type, go to step h.
Press Black Start or Color Start to
start scanning without changing
additional settings.
h
Press a or bto choose File Type.
Press d or c to choose JPEG, PDF or
TIFF.
Press OK.
Note
• If you chose color in the Quality setting,
you cannot choose TIFF.
• If you chose black & white in the Quality
setting, you cannot choose JPEG.
i
Press Black Start or Color Start.