Adjusting Brightness, Contrast And Color - Brother DCP-385C User Manual

PhotoCapture Center
Adjusting Brightness,
Contrast and Color
Brightness
a
Press a or b to choose Brightness.
b
Press d to make a darker print or press
c to make a lighter print.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Contrast
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
Press a or b to choose Contrast.
b
Press d to increase the contrast or press
c to decrease the contrast.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life
You can turn on the color enhancement
®
(True2Life ) feature to print more vivid
images. Printing time will be slower.
a
Press a or b to choose True2Life.
Press OK.
b
Do one of the following:
If you want to customize the
White Balance, Sharpness or
Color Density, press d or c to
choose On, and then go to step c.
If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
®
: Printing photos from a memory card or USB Flash memory drive
c
5
d
5
e
5
f
• White Balance
®
)
5
• Sharpness
• Color Density
Press a or b to choose
White Balance, Sharpness or
Color Density.
Press d or c to adjust the degree of the
setting.
Press OK.
Do one of the following:
If you want to customize another
color enhancement, press a or b to
choose other option.
If you want to change another
settings, press a or b to choose
Exit, and then press OK.
If you do not want to change additional
settings, press Color Start to print.
Note
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.
5
47