ASSEMBLY & INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
TV installation types:
Stand assembly
a. Attach stands to base of TV, ensuring 'L' and 'R' markings on the TV and
stand match.
b. Insert three
screws and use Phillips head screwdriver
M4 x 23mm
(not supplied) to tighten.
1a
Wall-mounting installation
c. To use with a wall mount (wall mounting kit not included), do not fit the
stands. Refer to the 400x300 VESA wall mount pattern on the rear of the
TV and follow instructions provided with wall mount.
1c
2. Connect to antenna
a. Connect an antenna cable (not supplied) via the 'ANT' input port at the
back of the TV.
b. Ensure the antenna cable is also connected to a working antenna, either
via an antenna wall socket in your home, or directly.
2a
1b
3. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert batteries (x2 1.5V AAA size for the standard remote, x2 1.5V AA size
for the magic remote) making sure to match the polarity markings (+ / -)
of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.
3a
ANT
Antenna cable
(not supplied)
• Standard = AAA
• Magic = AA
3b
Antenna
wall socket
2b
3c
8