Kogan 8 Series UN8910 User Manual page 17

SETTINGS (cont'd)
Resetting Picture Mode
If you want to reset the image settings to the factory defaults after configuring
the image settings, select reset for each image mode.
Aspect Ratio Settings
You can change the screen size according to the type of content you are
watching.
16:9: Displays an aspect ratio of 16:9.
Original: Changes the aspect ratio to 4:3 or 16:9 depending on the input video
signal.
4:3: Displays an aspect ratio of 4:3.
Vertical Zoom: You can adjust the vertical dimension of the screen and align
the screen vertically by using Adjust Zoom Ratio and Adjust Screen Position.
4-Way Zoom: You can adjust the horizontal/vertical/diagonal dimensions of
the screen and align the screen horizontally/vertically by using Adjust Zoom
Ratio and Adjust Screen Position.
NOTES
• The configurable items differ depending on model.
• The picture may get distorted while zooming in or out.
• Selecting a different screen size from the original size may cause the image to
look different.
• Depending on the combination of picture format and screen size, the edges
may be hidden or shown in black, or both sides of the picture may flicker. Also,
when selecting an item shown on the broadcast screen, the outline may not
be aligned correctly.
• Depending on the input signal, the available screen sizes may be different.
Just Scan: If you turn this feature On, you can view the content in the aspect
ratio that is in the broadcast signal or content source. If the edge of the screen
is not clean, please turn it Off. If set to Auto, the feature switches between On
or Off status depending on the information contained in the video signal. The
items that can be selected may vary depending on the current input.
Energy saving
Reduces power consumption by adjusting screen brightness. If you use Energy
Saving function, brightness of your TV will be affected.
Select between: Off / Min / Med / Max / Screen Off
Off: Turns off the Energy Saving mode.
Minimum / Medium / Maximum: Applies the pre-set Energy Saving mode.
Screen Off: Screen is turned off and only sound is played. Press any button
except the power and the volume buttons to turn the screen back on.
Additional settings:
Eye Comfort Mode: The colour temperature will be adjusted to reduce eye
fatigue. Select On/Off.
HDMI ULTRA HD Deep Colour: If you connect a device that supports this
function, you can enjoy a clearer image. After connecting the playback device,
set to On.
If the connected device does not support this function, it may not work
properly. In that case, change the setting to Off.
Instant Game Response
Set the HDMI port connected to the device to be On to enjoy games with
the optimal video for the game. If the connected device does not support this
function, it may not work properly.
NOTES
• Set the HDMI ULTRA HD Deep Colour feature to On for the HDMI terminal
connected to the gaming device to enable Instant Game Response.
• It works only when the Sound > Sound Out is Internal TV Speaker/Audio Out
(Line Out)/Wired Headphones/Wired Headphones + Internal TV Speaker (the
configurable items differ depending on model.)
• When the Instant Game Response is launched, the video may blink
temporarily.
• If you turn this feature On, you cannot change some video settings items.
17