2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 54
Mains failure
You must reset the time after a lengthy mains
outage.
When the power is restored, the time and date will flash.
Reset the time.
Turn the knob to
.
The days begin to flash.
Press + or -- pour
to make your choice, OK to
confirm it and go to the next
setting.
Day
Hours
Repeat the operations to set
the hours and minutes.
Turn the knob to exit the
setting mode.
Minutes
Note: All other settings are unchanged.
- 53 -