Acova PREMIUM BOX Instructions For Use Manual page 40

2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 41
Associating receivers (CF05)
For each receiver, you must specify the programming
zone with which it is to be associated as well as its load
shedding channel (from d1 to d8, d0 = no load shedding).
If more than one receiver is associated with the same
programming zone, it is recommended that they each
be given a separate load shedding channel to prevent
simultaneous load shedding.
On the transmitter:
Select the zone to associate by pressing the
then press + or -- to choose the load shedding channel,
e.g. d=2
Selecting
the load-shedding
channel
(only if associated
with an energy
manager)
The transmitter sends
a frame to the receivers.
Selection of
programming
zone
Go to menu
CF06
- 40 -
button,