Acova PREMIUM BOX Instructions For Use Manual page 41

2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 42
On the receiver: Press the
until the receiver's OK LED begins to flash slowly.
Press and release the
The LED stops flashing.
The receiver is now associated with the selected zone.
Repeat the procedure for each zone. Press OK to exit
the association mode.
Example: Receivers A and B are associated
Receiver A: load shedding channel
2 Receiver B: load shedding channel 3
Associating receiver A
to the load shedding channel 2.
On the transmitter:
Press + or -- to select the load
shedding channel: d=2
On the receiver:
Press the
until the receptor's OK LED begins
to flash slowly.
Press and release button
flashing. Receiver A is associated with zone 1 and load
shedding channel d=2.
with zone 1.
button for 5 seconds
- 41 -
button for 5 seconds
button.
Load-shedding
channel selection
. The green LED stops
Go to
the CF06
menu